Personalized Christmas ornaments
BetaBeta version. Check the file in your slicer before printing. Found a problem? Contact us.
Bauble, bell, lantern, drop and onion with a texture, a name and a screw-on hanger (no glue) — or a flat two-color ornament with the family name. Preview in 3D and get the STL.
How it works — watch the video
- 1Pick the type: round ornament (screw-on cap) or flat (2 colors).
- 2Choose the shape, texture and hanger, and type the name.
- 3Download and print: body and hanger separately, or the flat one with a single color-change pause.
Shape
Texture
Hanger (screws onto the neck)
Finish
Text position
Design
Colors
Preview only. The color comes from your filament.
Fine tuning
Cap too tight to screw on: increase it (0.3 to 0.5 mm). Too loose: decrease it.
Create a free account and get 1 download from any tool, in any format.
- Prints upright: the body on its flat base (the drop stands on its flattened tip — use a brim) and the hanger upside down.
- The hanger screws onto the ornament's neck. Test the thread on one ornament before printing many.
- The ring/star/bow comes in the hanger file as a 2nd part fitted into it; your slicer merges them.
- For a light, fast print: 2 walls and 5–10% infill (gyroid). Printed solid, a 70 mm bauble goes over 60 g.